Technical Parameters
viscosity : 350~650mPa.s（25℃）
density: 1.05~1.25g/cm³
Recommended printing parameters
Recommended bottom exposure time：25~30s(light intensity:3500~4500µw/㎝² )
Recommended exposure time：2.5~3.5s
Lifting distance ：6mm
Bottom lifting speed：60mm/min
lifting speed:80mm/min
band：385~410nm
Parameters after molding
Maximum force (KGF) : 162.76±10%
Deformation of maximum force point (mm) : 6.80±10%
Shore hardness (D) : 80~88
Impact strength (j/m) : 454.37±10%
